Yamaha HS8I Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di altoparlanti Yamaha HS8I. Yamaha HS8I 20. Powered studio monitor and powered subwoofer
Anche per Yamaha HS8I: Manuale d'uso (20 pagine), Manuale d'uso (20 pagine), Manuale d'uso (20 pagine), Manuale d'uso (20 pagine), Manuale d'uso (20 pagine)

Stampa la pagina

HS8S (Subwoofer)

Subwoofer Connections

1 INPUT L/R connector

These connectors receive the input signal to the

subwoofer. Balanced XLR and balanced phone jack

connectors are provided for both the L and R inputs.

The L and R inputs can be used simultaneously.

Signals supplied to both the L and R inputs are mixed

internally.

NOTE The XLR and phone jack input connectors can not be

used simultaneously. Use only one input connector at a

time.

NOTE Refer to "Connectable cables" on page 5 for more

connector details.

Connectin the Subwoofer to the

HS8/HS7/HS5 Speakers

2 OUTPUT L/R connectors

These are the subwoofer's output connectors.

The input signals received at the INPUT L and R

connectors are output via the OUTPUT L and R

connectors, respectively. Low frequency reproduction

characteristics can be adjusted via the LOW CUT

switch and LOW CUT control.

3 LOW CUT switch

When this switch is ON, the low frequencies are

attenuated prior to output via the OUTPUT L and R

connectors at the frequency set by the LOW CUT

control. The low-frequency attenuation cutoff

frequency can be adjusted via the LOW CUT control.

4 LOW CUT control

Adjusts the low-frequency attenuation cutoff

frequency between 80 Hz and 120 Hz when the LOW

CUT switch is ON.

4 5

HS8S

si nal flow

Subwoofer Response Control

5 HIGH CUT control

Sets the cutoff frequency for subwoofer output high-

frequency attenuation from 80 Hz to 120 Hz.

6 PHASE switch

Switches the phase of the subwoofer output.

This switch should be set to [NORM.] in most

situations, but in combination with some speakers

and in some speaker layouts switching to the [REV.]

setting may improve low-frequency response. Select

the setting that provides the best bass response in

your system.

7 LEVEL control

Adjusts the subwoofer output level.

8 Power switch

Turns power to the subwoofer ON or OFF.

Rock the switch to the right [

the left [

panel will light when the power is ON.

NOTICE

• Turning the power switch ON and OFF in rapid succession can cause

the device's electronics to malfunction. Please wait for 3 seconds or

more after turning the power OFF before turning it ON again.

• Even when the power switch is turned off, electricity is still flowing to

the product at the minimum level. When you are not using the product

for a long time, make sure to unplug the power cord from the wall AC

outlet.

9 AC IN connector

Connect the supplied power cable here. First connect the

power cord to the subwoofer, then insert the power cord

plug into the AC outlet.

] to turn the power ON, or to

] to turn the power OFF. The logo on the front

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner's Manual

6 7