Clark Synthesis TST429 Manuale di installazione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione per Amplificatore Clark Synthesis TST429. Clark Synthesis TST429 20. Platinum, gold, silver and all weather transducers
Anche per Clark Synthesis TST429: Manuale supplementare (4 pagine), Manuale di installazione (8 pagine), Manuale di installazione (1 pagine), Manuale dell'acquirente (2 pagine), Specifiche (1 pagine), Manuale di installazione (20 pagine)

Stampa la pagina
Clark Synthesis TST429 Manuale di installazione

Installation: Overview

Installation Type: Unimount Bracket
Screws into the bottom of the mounting surface.
Requires access only to the bottom of the mounting
surface. Requires a flat or nearly flat mounting surface.
Minimum 4-1/2" vertical space required,
including 1/2" clearance between the
Transducer and the floor.
3/4"-thick
mounting
surface
Unimount
Bracket
Flat Washer
Lock Washer
Screw
Jam Nut (up)
Transducer Lead Wire
6
Tactile Sound Transducers
NEVER TIGHTEN
BY TURNING THE
TRANSDUCER.
MAKE SURE TO
TIGHTEN THE JAM
NUT AGAINST THE
TRANSDUCER'S
BRASS NUT
3/8"-16
Threaded Stud
Jam Nut (down)
Washers
Screw
Jam Nuts
Installation Type: Hanger Bolt
Screws into the bottom of the mounting surface (into a
5/16" drilled hole. Requires access only to the bottom
of the mounting surface.
Minimum 3-1/2" vertical space required,
including 1/2" clearance between the
Transducer and the floor.
Minimum
3/4"-thick
Transducer Lead Wire
Tip: Tighten
two Jam Nuts
against each
other to screw
in Hanger Bolt
using wrench.
Joist
(edge view)
Drill 5/16" hole
3/8"-16
Hanger Bolt
Jam Nut (down)
Jam Nut
www.clarksynthesis.com