Clarke 3120188 Istruzioni per l'utente - Pagina 3

Sfoglia online o scarica il pdf Istruzioni per l'utente per Utensile elettrico Clarke 3120188. Clarke 3120188 4. Sanding drum set

SAFE OPERATION & USE

WARNING: COMPONENTS OF THIS DRUM SET ARE DESIGNED TO ROTATE

AT VERY HIGH SPEED. IT IS VITAL THAT THEY ARE TREATED WITH CARE AND

RESPECT. DO NOT USE IF DAMAGED.

SAFE PRACTICE

NEVER use a drum if the spindle is bent or damaged.

If used with a high speed air tool, always check that the spindle is not bent by

first fitting to an electric hand drill, gently switching on, and observing the drum

runs true. If in doubt, do not use.

Ensure the drum is capable of withstanding the rotational speed of the tool -

refer to 'Specifications'.

ALWAYS ensure the jaws are tight when fitting to a power tool, and always

retest for tightness before every operation.

ALWAYS wear a dust mask and safety goggles, manufactured to current

European Standards, and a pair of industrial quality gloves whenever you use

this drum set with a power tool.

When using on metal surfaces, take all necessary fire precautions as sparks will

be created.

METHOD OF USE

The nut on the spindle of each drum has a LEFT HAND thread. Turn the nut

clockwise to move it away from the drum so that a slight gap appears, then

slide the abrasive sleeve fully over the drum.

Turn the spindle nut anticlockwise so that the drum is squeezed and expands

to grip the sleeve. Turn the nut until the sleeve is held firm but take care not to

overtighten.

Insert the drum spindle into your power tool to the FULL DEPTH of the spindle,

having ensured the complete assembly is in perfect condition and tighten the

chuck or collet jaws fully.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]