Clarke CCRT266 Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Utensile elettrico Clarke CCRT266. Clarke CCRT266 17. Cordless rotary tool kit
Stampa la pagina
FITTING AN ACCESSORY
IMPORTANT: Ensure the tool is switched OFF
TO FIT AN ACCESSORY, PROCEED AS FOLLOWS.
1. Make sure that the correct size collet has been fitted.
2. Press and hold down the spindle lock.
• It may be necessary to rotate the
chuck to fully engage the spindle
lock.
3. Rotate the chuck sleeve in an
anticlockwise direction until the collet
jaws are open sufficiently to accept
the accessory.
4. Insert the accessory into the collet as
far as it will go.
5. Press and hold down the spindle lock
and tighten the chuck sleeve using
the spanner supplied.
TO REMOVE THE ACCESSORY FROM THE COLLET, PROCEED AS FOLLOWS.
1. Press and hold down the spindle lock.
2. Using the spanner supplied, rotate the chuck sleeve in an anti-clockwise direction.
3. When the accessory is released, remove it.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10