Clarke CSA10F Manuale di istruzioni per l'uso e la manutenzione - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso e la manutenzione per Utensile elettrico Clarke CSA10F. Clarke CSA10F 11. 10 ton hydraulic press
Stampa la paginaB. CSA10B
1.
Bolt the feet to the side
members using the nuts
bolts and washers provided.
2.
Bolt on the top and bottom
plates in the manner shown
in fig. 2 , ensuring the bottom
plate is that with the
threaded hole at its centre.
Do not fully tighten the nuts.
3.
Feed the ram assembly
down through the hole in
the top plate and screw it
fully into the threaded hole
in the bottom plate. The
pressure gauge at this point
should be facing the front.
Centralise the ram between
the top rails before
tightening the securing bolts
It is strongly recommended that
the Bench Press be securely
bolted to a sturdy workbench
HYDRAULIC PUMP/RAM OPERATION
The pump is provided with handwheel , which opens or closes a valve in the pump
to raise the ram or lower it under pressure.
Turn the handwheel clockwise and pump the handle to operate (or lower) the
ram. Turning the handwheel anticlockwise releases the pressure and the ram will
rise.
6
Fig.2