Clarke Strong-Arm CSA15F Istruzioni per il funzionamento e la manutenzione - Pagina 5
Sfoglia online o scarica il pdf Istruzioni per il funzionamento e la manutenzione per Utensile elettrico Clarke Strong-Arm CSA15F. Clarke Strong-Arm CSA15F 12. 15 tonne shop press
Stampa la pagina
ASSEMBLY
3.
Insert the two support pins (10) as
shown in Fig. 3. Make sure that the
two pins are level and secured
using the clevis pins supplied (25).
4.
Place the work bed (9) on to the
support pins (10) as shown in Fig.
4.
5.
Remove the pump assembly from
the inside of the frame and
reattach the pump assembly (17)
to outside as shown in Fig.5.
The pump assembly is supplied with
a travel plug fitted.
•
Remove the travel plug
•
Fit the vent plug supplied
Support Pin
Fig. 5
5
Fig. 3
Clevis Pin
Fig. 4
Travel Plug