Clarke Strong-Arm CSA15F Инструкции по эксплуатации и техническому обслуживанию - Страница 5
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Электроинструмент Clarke Strong-Arm CSA15F. Clarke Strong-Arm CSA15F 12 страниц. 15 tonne shop press
Печатать страницу
ASSEMBLY
3.
Insert the two support pins (10) as
shown in Fig. 3. Make sure that the
two pins are level and secured
using the clevis pins supplied (25).
4.
Place the work bed (9) on to the
support pins (10) as shown in Fig.
4.
5.
Remove the pump assembly from
the inside of the frame and
reattach the pump assembly (17)
to outside as shown in Fig.5.
The pump assembly is supplied with
a travel plug fitted.
•
Remove the travel plug
•
Fit the vent plug supplied
Support Pin
Fig. 5
5
Fig. 3
Clevis Pin
Fig. 4
Travel Plug