Clarke CONTRACTOR CON300 Manuale di istruzioni per l'uso e la manutenzione - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso e la manutenzione per Sander Clarke CONTRACTOR CON300. Clarke CONTRACTOR CON300 17. Electric sander
Stampa la pagina
MAINTENANCE
WARNING!
Make sure that the sander is switched off and disconnected from the
mains supply before starting any cleaning or maintenance procedures.
• Keep the cooling vents clear.
• Clean the housing with a soft cloth.
• Any worn or damaged parts should be replaced by qualified personnel.
• Keep the handles clean and free from oil and grease.
• There are no user serviceable parts inside this sander.
TROUBLE SHOOTING
SANDER IS OVERHEATING
• Clean the ventilation holes, and blow out with compressed air or clean
with a dry cloth.
• Overloading the machine could cause overheating. Do not apply
excessive pressure.
SANDER DOES NOT OPERATE WHEN SWITCHED ON
• Check to make sure that the fuse has not blown, if it has, replace the
fuse. If the fuse blows repeatedly, consult your CLARKE dealer.
• If the fuse is OK and the machine still does not work, consult your CLARKE
dealer.
THE DUST IS NOT EXTRACTED
• Dust extractor port is blocked.
10