- ページ 10

サンダー Clarke CONTRACTOR CON300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CONTRACTOR CON300 17 ページ。 Electric sander

MAINTENANCE

WARNING!

Make sure that the sander is switched off and disconnected from the

mains supply before starting any cleaning or maintenance procedures.

• Keep the cooling vents clear.

• Clean the housing with a soft cloth.

• Any worn or damaged parts should be replaced by qualified personnel.

• Keep the handles clean and free from oil and grease.

• There are no user serviceable parts inside this sander.

TROUBLE SHOOTING

SANDER IS OVERHEATING

• Clean the ventilation holes, and blow out with compressed air or clean

with a dry cloth.

• Overloading the machine could cause overheating. Do not apply

excessive pressure.

SANDER DOES NOT OPERATE WHEN SWITCHED ON

• Check to make sure that the fuse has not blown, if it has, replace the

fuse. If the fuse blows repeatedly, consult your CLARKE dealer.

• If the fuse is OK and the machine still does not work, consult your CLARKE

dealer.

THE DUST IS NOT EXTRACTED

• Dust extractor port is blocked.