Clarke EZ-8 07060A Manuale di servizio - Pagina 8
Sfoglia online o scarica il pdf Manuale di servizio per Sander Clarke EZ-8 07060A. Clarke EZ-8 07060A 10.
Stampa la paginaSYMPTOM
Motor will not start.
Motor runs sluggishly.
Motor labors and overload
trips/repeatedly
Drive belts jump teeth or squeak.
Squealing, growling or grinding
noise coming from machine.
Uneven cut.
56043147
EZ-8 TROUBLE SHOOTING
CAUSE
No power.
Defective switch and/or contactor.
Defective start capacitor.
Poor connections.
Motor overload tripped.
Defective motor.
Low voltage from excessive length,
undersize extension cord, or poor
connection.
Defective run capacitor.
Defective motor.
Low voltage from excessive length,
undersize extension cord, or poor
connection.
Excessive load.
Defective motor.
Defective capacitors
Damaged belt.
Worn Pulley.
Improper belt alignment
Damage and/or worn bearings
Leveling out of adjustment.
Wheels worn or debris on them.
Worn or Bad drum
REPAIR
Check power supply and connections.
Replace switch and/or contactor.
Replace start capacitor.
Check connections.
Remove power. Depress reset button on motor.
Replace motor.
Locate power source nearer to work site. Check
connections.
Replace capacitor.
Replace motor.
Remove power and allow motor to cool.
Depress reset button on motor.
Locate power source nearer to worksheet. Check
connections
Do not force handle down.
Replace motor.
Replace capacitors.
Replace belt.
Replace Pulley.
Align Pulley.
Remove drives belts.
Rotate motor, fan and drum shaft to locate dragging
or rough bearing. Replace bad bearing
Readjust leveling.
Replace or clean wheels.
Replace drum.
Page 8