Clarke EZ-8 07060A Servicehandleiding - Pagina 8

Blader online of download pdf Servicehandleiding voor {categorie_naam} Clarke EZ-8 07060A. Clarke EZ-8 07060A 10 pagina's.

Pagina afdrukken

SYMPTOM

Motor will not start.

Motor runs sluggishly.

Motor labors and overload

trips/repeatedly

Drive belts jump teeth or squeak.

Squealing, growling or grinding

noise coming from machine.

Uneven cut.

56043147

EZ-8 TROUBLE SHOOTING

CAUSE

No power.

Defective switch and/or contactor.

Defective start capacitor.

Poor connections.

Motor overload tripped.

Defective motor.

Low voltage from excessive length,

undersize extension cord, or poor

connection.

Defective run capacitor.

Defective motor.

Low voltage from excessive length,

undersize extension cord, or poor

connection.

Excessive load.

Defective motor.

Defective capacitors

Damaged belt.

Worn Pulley.

Improper belt alignment

Damage and/or worn bearings

Leveling out of adjustment.

Wheels worn or debris on them.

Worn or Bad drum

REPAIR

Check power supply and connections.

Replace switch and/or contactor.

Replace start capacitor.

Check connections.

Remove power. Depress reset button on motor.

Replace motor.

Locate power source nearer to work site. Check

connections.

Replace capacitor.

Replace motor.

Remove power and allow motor to cool.

Depress reset button on motor.

Locate power source nearer to worksheet. Check

connections

Do not force handle down.

Replace motor.

Replace capacitors.

Replace belt.

Replace Pulley.

Align Pulley.

Remove drives belts.

Rotate motor, fan and drum shaft to locate dragging

or rough bearing. Replace bad bearing

Readjust leveling.

Replace or clean wheels.

Replace drum.

Page 8