Clarke DUO SAW Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 12
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Sega Clarke DUO SAW. Clarke DUO SAW 20. Multi purpose 5”(125mm) twin blade saw
Stampa la paginaMAINTENANCE
CHANGING THE BLADES
• This Duo Saw uses specially designed blades available from your
Clarke dealer: no other types of blade should ever be used. Other
types of blades will not operate safely in this saw & could result in
serious personal injury.
• The side of the blades cannot be used for cutting. Therefore, in
horizontal cuts, make sure saw is not resting on lower blade and
wedge the workpiece to prevent unexpected trapping of the
blade.
WARNING: MAKE SURE THAT THE DUO SAW IS SWITCHED OFF AND
UNPLUGGED FROM THE MAINS SUPPLY BEFORE FITTING OR REMOVING
ANY BLADES.
REMOVING THE BLADES
1. Use the wrench supplied to line up the holes in the blade.
2. Insert the pin into the holes to lock
the blades in position.
3. Use the wrench to remove the
lock nut (turn anticlockwise to
release).
4. Slide the guard back and hold in
position.
5. Remove blade 'B'.
6. Remove blade 'A'.
• A pair of replacment blades
are available from your CLARKE
dealer, Part number 6462048.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
12
Lock
Nut