Clarke WoodWorker CCS1 Istruzioni per il funzionamento e la manutenzione - Pagina 4
Sfoglia online o scarica il pdf Istruzioni per il funzionamento e la manutenzione per Sega Clarke WoodWorker CCS1. Clarke WoodWorker CCS1 12. 185mm circular saw
Stampa la pagina14. ALWAYS wear proper apparel. loose clothing or jewellery may
get caught in moving parts. wear protective hair covering to
contain long hair.
15. ALWAYS use recommended accessories. the use of improper
accessories could be hazardous.
16. ALWAYS remove plug from electrical outlet when adjusting,
changing parts, or working on the machine.
17. NEVER operate machine while under the influence of drugs, alcohol or any medication.
18. NEVER leave machine running unattended. turn power off. Do
not leave the machine until it comes to a complete stop.
19. NEVER force the machine. it will do a better and safer job at
the rate for which it was designed.
20. NEVER use power tools in damp or wet locations or expose
them to rain. Keep your work area well illuminated. do not use
in explosive atmosphere (around paint, flammable liquids etc.).
Avoid dangerous environment.
Additional Precautions For Circular Saws
1.
ALWAYS wear ear protectors/defenders as the noise level of this machine can exceed
85dB (A).
2.
ALWAYS use the appropriate saw blade for the material being cut.
3.
ALWAYS keep the mains cable well away from the machine and ensure an adequate
electrical supply is close at hand so that the operation is not restricted by the length of
the cable.
4.
ALWAYS switch the machine OFF immediately the task is completed.
5.
ALWAYS allow sufficient clearance beneath the work to ensure the blade does not
come into contact with the work bench etc.
6.
ALWAYS ensure the blade is fully tightened before use.
7.
ALWAYS let saw stop completely before putting down.
8.
ALWAYS check blade guard has returned before putting saw down.
9.
NEVER use the saw with the riving knife removed, (see Fig. 1).
10. NEVER operate the saw when the blade guard is not working properly. Guard should
be checked for correct operation before each use.
11. NEVER start the saw when the blade is in contact with the work.
12. NEVER allow the ventilation slots in the machine to become blocked.
13. DO NOT use the machine if the electric cable, plug or motor is in poor condition.
14. When cutting e.g. doors etc ensure all nails have been removed beforehand. Nails will
damage the saw blade.
14. Replacement blades are available from your CLARKE dealer.
Note :
The guard is operating correctly when it moves freely and readily returns to closed position
Additionally, please keep these instructions in a safe place for future reference.
3