Clarke WoodWorker CCS1 Istruzioni per il funzionamento e la manutenzione - Pagina 5

Sfoglia online o scarica il pdf Istruzioni per il funzionamento e la manutenzione per Sega Clarke WoodWorker CCS1. Clarke WoodWorker CCS1 12. 185mm circular saw

Stampa la pagina

Electrical Connections

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for

connection to a standard, domestic electrical supply. Should the plug need changing at

any time, ensure that a plug of identical specification is used.

This appliance is Double Insulated, and the two wires in the mains lead should

be wired up in accordance with the following colour code:

•

Connect the BLUE coloured cord to the plug terminal marked a letter "N"

•

Connect the BROWN coloured cord to the plug terminal marked a letter "L"

If this appliance is fitted with a plug which is moulded on

to the electric cable (i.e. non-rewireable) please note:

1. The plug must be thrown away if it is cut from the

electric cable. There is a danger of electric shock if

it is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

3. Should you wish to replace a detachable fuse

carrier, ensure that the correct replacement is used

(as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from

your local Clarke dealer or most electrical stockists.

FUSE RATING

The fuse in the plug must be replaced with one of the same rating (13 amps) and this

replacement must be ASTA approved to BS1362.

If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.

CABLE EXTENSION.

Always use an approved cable extension suitable for the power rating of this tool (see

specifications), the conductor size should also be at least the same size as that on the

machine, or larger. When using a cable reel, always unwind the cable completely.

WARNING

BLUE

NEUTRAL

BROWN

LIVE