Clarke ZX-R Pro Series Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 8

ON/OFF SWITCH

1. Press and hold the safety switch

and then squeeze the trigger.

• The saw features a variable

speed trigger. for increased

speed, squeeze the trigger

harder. for decreased speed,

apply less pressure to the

trigger.

2. Release the trigger to stop the

saw.

WARNING: THE BLADE WILL CONTINUE TO RUN FOR A SHORT PERIOD

AFTER THE TRIGGER HAS BEEN RELEASED. WAIT UNTIL IT STOPS BEFORE

REMOVING IT FROM THE WORKPIECE.

1. Install the blade.

2. To begin sawing, grip the saw firmly with both hands, rest the front of the

shoe on your workpiece with the blade above the work.

IMPORTANT: Do not start the saw if the saw blade is in contact with anything.

3. Press and hold down the safety switch and then squeeze the trigger.

4. Allow the tool to come up to full speed before touching the work material.

5. Guide the saw blade into the workpiece.

WARNING: KEEP THE SHOE PRESSED FIRMLY AGAINST THE WORKPIECE

WHILE CUTTING TO PREVENT TOOL KICKBACK.

6. Maintain a smooth motion, guiding the blade through the material as it is

cut. Do not press too hard. If the saw slows down as it is cutting, apply less

pressure.

7. To stop the saw, release the trigger.

8. Allow the tool to come to a complete stop before setting it down.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]