Clarke 6925128 Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Riscaldatore Clarke 6925128. Clarke 6925128 13. 2.8kw workshop ptc heater
Stampa la pagina
OPERATION
WARNING: DO NOT USE THIS HEATER IN SMALL ROOMS IF OCCUPIED BY
PERSONS NOT CAPABLE OF LEAVING THE ROOM ON THEIR OWN, UNLESS
CONSTANT SUPERVISION IS PROVIDED.
CAUTION: SOME PARTS OF THIS PRODUCT CAN BECOME VERY HOT AND
CAUSE BURNS. PARTICULAR ATTENTION HAS TO BE GIVEN WHERE
CHILDREN AND VULNERABLE PEOPLE ARE PRESENT.
1. Put the heater in a level position
on a firm, flat surface and at a
safe distance from flammable
materials. Keep a minimum of 2m
clearance all round.
2. Connect the heater to a suitable
power supply.
3. Set the thermostat control to the
maximum setting (fully clockwise).
4. Set the mode selector to one of
the 3 settings:
• The heater will take up to three minutes to reach optimum temperature.
5. Once the room reaches the required temperature, turn the thermostat
control slowly counter-clockwise until the thermostat clicks. Leave the
control in this position.
• The room temperature will be maintained at this setting. The heater will
continue to operate until the power switch is turned to the OFF position.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Off
Fan only
Fan + Heat Setting 1
Fan + Heat Setting 2
8