- ページ 8

ヒーター Clarke 6925128のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 6925128 13 ページ。 2.8kw workshop ptc heater

OPERATION

WARNING: DO NOT USE THIS HEATER IN SMALL ROOMS IF OCCUPIED BY

PERSONS NOT CAPABLE OF LEAVING THE ROOM ON THEIR OWN, UNLESS

CONSTANT SUPERVISION IS PROVIDED.

CAUTION: SOME PARTS OF THIS PRODUCT CAN BECOME VERY HOT AND

CAUSE BURNS. PARTICULAR ATTENTION HAS TO BE GIVEN WHERE

CHILDREN AND VULNERABLE PEOPLE ARE PRESENT.

1. Put the heater in a level position

on a firm, flat surface and at a

safe distance from flammable

materials. Keep a minimum of 2m

clearance all round.

2. Connect the heater to a suitable

power supply.

3. Set the thermostat control to the

maximum setting (fully clockwise).

4. Set the mode selector to one of

the 3 settings:

• The heater will take up to three minutes to reach optimum temperature.

5. Once the room reaches the required temperature, turn the thermostat

control slowly counter-clockwise until the thermostat clicks. Leave the

control in this position.

• The room temperature will be maintained at this setting. The heater will

continue to operate until the power switch is turned to the OFF position.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Off

Fan only

Fan + Heat Setting 1

Fan + Heat Setting 2