LEGO 42031 Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Giocattolo LEGO 42031. LEGO 42031 8. Tow truck

Then attach this part to your main structure by the 1x1 long connector in the third hole from the left. Push

the oblong part in all the way.

Bag 4 – 5.

Hold a double long connector ver, upright, and insert the bottom into the 4th hole from the right of the

13x1 oblong piece.

Repeat to the right.

Insert a ridged Philips stick hor from the right into the cross-hole in the middle of the two PPs.

Lay momentarily aside.

Bag 6.

With your left hand hold a short tube with the two Philips sticks attached at 90 degrees so that the tube is

at the bottom on the left, front to back.

With your right hand, hold a tube with a philips tube attached, hor, so the tube is to the right, front to back.

Insert the right stick into the cross hole of the Philips tube.

Hold a connector with the tube in the middle ver, so that the tube is from left to right. Insert the back end

of this piece from the front into the right tube of your part.

Lay momentarily aside.

6.3.

Insert the ridged ends of two short philips-connectors, from left and right, into both ends of a ribbed tube

with the hole in the middle.

Insert the left end of the left connector of this part, from the right, into the middle hole of the PP, (the right

tube of the part we put aside) so that the middle hole of this piece is from front to back.

6.4.

Hold a 4/1 L-piece upright, the toe to the bottom at the left, and put the long connector long side first, from

the back into the left toe hole. Attach this l-connector part on the left of your previous piece.

6.5.

1. repeat step 6.1.

2. put this part in front of the L-piece. Symm to the similar part at the back.

3. put a 3x1 oblong piece ver, cross-holes to top and bottom, onto the two left upright attached

connectors.

6.7.

Insert a ridged stick into the top hole of the L-piece, half-way.

Put a 2x1 oblong piece from the back, ver, cross-hole on top, its hole from left-to-right on the back end of

the stick.