Clarke CFC100 Istruzioni per il funzionamento e la manutenzione - Pagina 7
Sfoglia online o scarica il pdf Istruzioni per il funzionamento e la manutenzione per Strumenti Clarke CFC100. Clarke CFC100 13. Folding crane
Anche per Clarke CFC100: Istruzioni per il funzionamento e la manutenzione (6 pagine)
Stampa la pagina
7. Fix the ram (21) into position using
bolt (22), washer (12) and nut (13
9. Connect the top of the ram (21)
to the jib (7) as shown using bolt
(11), washer (12) and nut (13).
NOTE: The ram may require
extending to facilitate
assembly, see page 8.
11. Pass the last link of the chain and
hook assembly (1) through the
hole on the bottom of the jib
extension (6). Secure the chain
using bolt (2), washer (3), lock
washer (4) and nut (5).
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8. Attach the jib (7) to the top of the
main support post (20) using bolt
(15), washer (12) and nut (13).
10. Slide the jib extension (6) into the
jib (7), use the pin assembly (29)
to lock it into the required position
The pin is secured by inserting the
attached R clip into the small hole at
the other end of the pin.
12. Connect the handle (18) to the
rear of the main support post (20)
using four bolts (16), and four lock
washers (17).
7