Clarke CFC100 운영 및 유지 관리 지침 - 페이지 7

{카테고리_이름} Clarke CFC100에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CFC100 13 페이지. Folding crane
Clarke CFC100에 대해서도 마찬가지입니다: 운영 및 유지 관리 지침 (6 페이지)

페이지 인쇄

7. Fix the ram (21) into position using

bolt (22), washer (12) and nut (13

9. Connect the top of the ram (21)

to the jib (7) as shown using bolt

(11), washer (12) and nut (13).

NOTE: The ram may require

extending to facilitate

assembly, see page 8.

11. Pass the last link of the chain and

hook assembly (1) through the

hole on the bottom of the jib

extension (6). Secure the chain

using bolt (2), washer (3), lock

washer (4) and nut (5).

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

8. Attach the jib (7) to the top of the

main support post (20) using bolt

(15), washer (12) and nut (13).

10. Slide the jib extension (6) into the

jib (7), use the pin assembly (29)

to lock it into the required position

The pin is secured by inserting the

attached R clip into the small hole at

the other end of the pin.

12. Connect the handle (18) to the

rear of the main support post (20)

using four bolts (16), and four lock

washers (17).