Claro GLIDER DC Manuale di installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione per Ventilatore Claro GLIDER DC. Claro GLIDER DC 17.

Claro GLIDER DC Manuale di installazione
4. Feed the main motor and light wire (light version only) plug up through the inside of the down rod,
then insert the down rod into the downrod holder. Gently push the cross-pin through the holes
aligned with the base of the downrod holder and downrod. Insert cotter pin into cross pin and
secure downrod with two set screws.
CAUTION: DO NOT force the cross-pin. Gently wiggle and rotate it until it glides through both
holes. The rod installs with the 3 holes up.
Cross-pin
Cotter-pin
5. Snuggle the coupling cover down onto the top of the motor housing. Put the canopy through the
downrod.
CAUTION: DO NOT remove rubber gasket on top of the coupling cover.
Set Screw
8