Claro GLIDER DC 설치 매뉴얼 - 페이지 9

{카테고리_이름} Claro GLIDER DC에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Claro GLIDER DC 17 페이지.

4. Feed the main motor and light wire (light version only) plug up through the inside of the down rod,

then insert the down rod into the downrod holder. Gently push the cross-pin through the holes

aligned with the base of the downrod holder and downrod. Insert cotter pin into cross pin and

secure downrod with two set screws.

CAUTION: DO NOT force the cross-pin. Gently wiggle and rotate it until it glides through both

holes. The rod installs with the 3 holes up.

Cross-pin

Cotter-pin

5. Snuggle the coupling cover down onto the top of the motor housing. Put the canopy through the

downrod.

CAUTION: DO NOT remove rubber gasket on top of the coupling cover.

Set Screw