Claro GLIDER DC 설치 매뉴얼 - 페이지 11

{카테고리_이름} Claro GLIDER DC에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Claro GLIDER DC 17 페이지.

11. Place receiver in the hanging bracket and follow the wire diagram to connect wires and connectors.

Connect power, receiver and the fan as per electrical wiring diagram.

IMPORTANT: The fan must be earthed! Double pole disconnection switch and wall switch must be

connected.

12. Place the canopy over the hanging bracket, align the canopy holes with the screws.

13. Twist the canopy

14. Tighten it with screws.

MODELS WITHOUT LIGHT:

a. Twist bottom plate clockwise onto motor shaft until it is secured.

IMPORTANT: DO NOT overturn.

Motor Wire

Light Wire

(light versions only)