Claro GLIDER DC Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wentylator Claro GLIDER DC. Claro GLIDER DC 17 stron.

11. Place receiver in the hanging bracket and follow the wire diagram to connect wires and connectors.

Connect power, receiver and the fan as per electrical wiring diagram.

IMPORTANT: The fan must be earthed! Double pole disconnection switch and wall switch must be

connected.

12. Place the canopy over the hanging bracket, align the canopy holes with the screws.

13. Twist the canopy

14. Tighten it with screws.

MODELS WITHOUT LIGHT:

a. Twist bottom plate clockwise onto motor shaft until it is secured.

IMPORTANT: DO NOT overturn.

Motor Wire

Light Wire

(light versions only)