CLAS OM 4029 Manuale di avvio rapido - Pagina 5

Sfoglia online o scarica il pdf Manuale di avvio rapido per Apparecchiature di servizio CLAS OM 4029. CLAS OM 4029 8. Stretch belt installation and removal tool

Stampa la pagina
CLAS OM 4029 Manuale di avvio rapido
OM 4029
STRETCH BELT INSTALLATION AND REMOVAL TOOL
Belt assembly
• Choose the right tightener (n°1,2) according to the diameter of the pulley on which you have to work.
• Put the tooth of the tightener on the external part of the pulley
• Tighten one the supplied screws (n°4,5,6,7) on the tting tool: for the Ø 50mm tightener (n°1) follow the same
locking procedure described above in the belt disassembling operation, for the Ø 32 tightener (n°2) screw the
screws into the threaded hole.
Warning: the screw has to lean on the bottom of the pulley (pic. D).
• Lay the belt on the lower part of the pulley (pic. E).
• Insert the tightener making it stick to the pulley (pic. F).
• Use the suitable key to turn the pulley and keep the tightener in its position (pic. G).
• Turn until inserting the belt completely on the pulley (pic. H).