CLAS OM 4029 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} CLAS OM 4029에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CLAS OM 4029 8 페이지. Stretch belt installation and removal tool

OM 4029

STRETCH BELT INSTALLATION AND REMOVAL TOOL

Belt assembly

• Choose the right tightener (n°1,2) according to the diameter of the pulley on which you have to work.

• Put the tooth of the tightener on the external part of the pulley

• Tighten one the supplied screws (n°4,5,6,7) on the tting tool: for the Ø 50mm tightener (n°1) follow the same

locking procedure described above in the belt disassembling operation, for the Ø 32 tightener (n°2) screw the

screws into the threaded hole.

Warning: the screw has to lean on the bottom of the pulley (pic. D).

• Lay the belt on the lower part of the pulley (pic. E).

• Insert the tightener making it stick to the pulley (pic. F).

• Use the suitable key to turn the pulley and keep the tightener in its position (pic. G).

• Turn until inserting the belt completely on the pulley (pic. H).