Lenovo E156 Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Telefono cellulare Lenovo E156. Lenovo E156 12.

3 . Getting Started

3.1 Battery

The battery at its initial condition is charged to 50% full, and can be

used after unwrapping. For the first three times of charging, do not

recharge until the battery is totally exhausted, so that the battery can

reach its best usage performance.

For removing:

Push the battery back cover;

Lift the battery up as indicated by the arrow;

Take the battery out.

Warning: Make sure to power off the phone before taking out SIM card,

otherwise your SIM card might be damaged.

For installing:

Place the metal contact points of the battery upward and flush

with metal contact points in the battery bay, then insert the bottom of

battery into battery bay;

Place the back cover of the battery onto the phone squarely,

and push in the direction of the arrow till it clicks into place.

Charging Battery

While charging, the power supply indicator at phone's screen icon

zone will flash in a rotation manner, if the phone is off while charging, a

charging screen will still appear, indicating that the phone is recharging.

If the phone is still being overused while the power supply is insufficient,

the recharging indicator will appear on the screen after the recharging

has started for a while.

When the power supply indicator at the screen's icon zone shows full

and stops flashing, it means charging has completed. If it takes place

when the phone is off, the screen will display charging-finished icon.

The process generally takes about 2.5 hours. It is normal that the

battery, the phone and the charger will become hot during the charging

process.

Charging completing, disconnect the phone and the charger from the

AC power supply.

Note: Battery must be charged in a well ventilated place with

surrounding temperature at -10℃~+55℃, and it is imperative that a