ページを印刷する3 . Getting Started
3.1 Battery
The battery at its initial condition is charged to 50% full, and can be
used after unwrapping. For the first three times of charging, do not
recharge until the battery is totally exhausted, so that the battery can
reach its best usage performance.
3.2 Removing and installing battery
For removing:
A.
Push the battery back cover;
B.
Lift the battery up as indicated by the arrow;
C.
Take the battery out.
Warning: Make sure to power off the phone before taking out SIM card,
otherwise your SIM card might be damaged.
For installing:
A.
Place the metal contact points of the battery upward and flush
with metal contact points in the battery bay, then insert the bottom of
battery into battery bay;
B.
Place the back cover of the battery onto the phone squarely,
and push in the direction of the arrow till it clicks into place.
Charging Battery
While charging, the power supply indicator at phone's screen icon
zone will flash in a rotation manner, if the phone is off while charging, a
charging screen will still appear, indicating that the phone is recharging.
If the phone is still being overused while the power supply is insufficient,
the recharging indicator will appear on the screen after the recharging
has started for a while.
When the power supply indicator at the screen's icon zone shows full
and stops flashing, it means charging has completed. If it takes place
when the phone is off, the screen will display charging-finished icon.
The process generally takes about 2.5 hours. It is normal that the
battery, the phone and the charger will become hot during the charging
process.
Charging completing, disconnect the phone and the charger from the
AC power supply.
Note: Battery must be charged in a well ventilated place with
surrounding temperature at -10℃~+55℃, and it is imperative that a
11
12