Disaster Area Designs Qconnect Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di registrazione Disaster Area Designs Qconnect. Disaster Area Designs Qconnect 16. Multi output midi controller

Stampa la pagina

etup

All of the configuration and customization options are contained within the Setup Menu. Any

changes you make in this menu are saved in the memory of the qCONNECT for future use.

Throughout this manual we'll indicate Setup Menu options as MENU = OPTION, meaning we'd

like you to navigate to that item in the Setup Menu and set its value to match.

NAVIGATING THE MENU:

SETU

HOLD TO

ENTER

Hold the left footswitch at

power-on to enter Setup.

Release the button when you

see SETUP on the display.

SETUP MENU ITEMS:

As you move through the menu you'll see the following items to edit. Feel free to tweak the

settings to your satisfaction, but if you're not sure about anything we recommend the default

settings as listed.

PRST: Number of presets available in Preset mode. If PRST is set to OFF, preset mode will be

disabled. Range OFF to 99, default 16.

DEV: Number of available device modes. The qCONNECT will scroll through the available

modes and then return to preset mode. Range OFF to DevJ, default DevH.

DEV.A

DEV.F

DEV.B

DEV.G

DEV.C

DEV.H

DEV.D

DEV.J

DEV.E

CFG.A

CFG.D

CFG.B

CFG.E

CFG.C

CFG.F

CFG.X

Configure the X and Y control ports.

CFG.Y

MID.T, MID.R, MID.B send MIDI on tip, ring, or both

EXP interfaces with expression pedal

TAP interfaces with tap tempo footswitch

MD.io sends and receives MIDI on same jack

Port X works with Meris and Alexander for Sysex Dumps

Port Y works with micro.clock for MIDI clock distribution

enu

HOLD TO

EDIT

Tap left or right to choose an

item to edit.

Hold left to edit the item, then

tap left or right to change its

value.

Hold left to return to the main

menu.

Device mode assignments. Select the device type assigned

to each channel of the controller to automatically set up the

correct MIDI commands for each device.

Note: There is no "DEV I" since I and 1 look very similar on the display

Configuration for the 6 main control ports, A-F.

TIP, RING, or BOTH sets which jack contacts transmit MIDI data.

Chase Bliss uses RING, most other devices use TIP

Select BOTH to use a y-cable on this port to feed two devices.

Defaults to RING.

PRE

TAP TO

MOVE

SAVE

HOLD TO

Hold the right footswitch to

save the settings and exit.

If you have changed any of the

port configurations, be sure to

power-cycle the qCONNECT.

SAVE