Aercus WS1093 Manuale operativo - Pagina 5

Sfoglia online o scarica il pdf Manuale operativo per Stazione meteorologica Aercus WS1093. Aercus WS1093 20. Professional wireless weather station with touchscreen and usb upload

Stampa la pagina

Reconnecting Lost Signal

If no outdoor weather data is displayed as a result of loss of signal during set up, mounting, changing of

batteries in the transmitter or plugging or unplugging cables, simply remove the batteries from the Base

Station wait 2 minutes and reinsert. After this the Base Station will make an initial measurement and

start to register the transmitter (the Outdoor Reception Signal icon will be turned on). Do not touch the

Base Station before the outdoor data is received (this may take several minutes) or the outdoor sensor

learning mode will be terminated. When the outdoor transmitter has been registered the Base Station will

automatically switch to the normal display mode from which all further settings can be adjusted by the

user.

Note: When replacing batteries in the transmitter wait two minutes before re-inserting for a proper reset.

Wind Direction

On the edge of the wind direction sensor, there are four letters - "N", "E", "S" and "W" representing the

directions North, East, South and West. The wind direction sensor has to be adjusted so that the directions

on the sensor are matching your real location. A permanent wind direction error will be introduced when

the wind direction sensor is not positioned correctly during installation.

Batteries

Note: Incorrectly inserting the batteries may cause a fault and invalidate the warranty so take care to

insert them with the correct polarity.

Note: Many rechargeable batteries are 1.2V and as such are not suitable for this unit which requires 1.5V

batteries. Rechargeable batteries also often leak their peak charge quickly which can cause reduced

transmission range. As such we recommend avoiding the use of rechargeable batteries.

Note: The performance of Alkaline batteries can be significantly reduced in colder environments resulting

in loss of signal. In this case we recommend the use of Lithium batteries in the thermo-hygro sensor.

Low Battery Indicator

The transmitter low battery indicator

may illuminate when temperatures are outside the range

of 10-35C. This does not necessarily indicate low batteries and will switch off once the temperature

returns to this range (also see note above on the use of Alkaline batteries).

- 5 -

WS1093