Aercus WS1093 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Погодная станция Aercus WS1093. Aercus WS1093 20 страниц. Professional wireless weather station with touchscreen and usb upload
Печатать страницуReconnecting Lost Signal
If no outdoor weather data is displayed as a result of loss of signal during set up, mounting, changing of
batteries in the transmitter or plugging or unplugging cables, simply remove the batteries from the Base
Station wait 2 minutes and reinsert. After this the Base Station will make an initial measurement and
start to register the transmitter (the Outdoor Reception Signal icon will be turned on). Do not touch the
Base Station before the outdoor data is received (this may take several minutes) or the outdoor sensor
learning mode will be terminated. When the outdoor transmitter has been registered the Base Station will
automatically switch to the normal display mode from which all further settings can be adjusted by the
user.
Note: When replacing batteries in the transmitter wait two minutes before re-inserting for a proper reset.
Wind Direction
On the edge of the wind direction sensor, there are four letters - "N", "E", "S" and "W" representing the
directions North, East, South and West. The wind direction sensor has to be adjusted so that the directions
on the sensor are matching your real location. A permanent wind direction error will be introduced when
the wind direction sensor is not positioned correctly during installation.
Batteries
Note: Incorrectly inserting the batteries may cause a fault and invalidate the warranty so take care to
insert them with the correct polarity.
Note: Many rechargeable batteries are 1.2V and as such are not suitable for this unit which requires 1.5V
batteries. Rechargeable batteries also often leak their peak charge quickly which can cause reduced
transmission range. As such we recommend avoiding the use of rechargeable batteries.
Note: The performance of Alkaline batteries can be significantly reduced in colder environments resulting
in loss of signal. In this case we recommend the use of Lithium batteries in the thermo-hygro sensor.
Low Battery Indicator
The transmitter low battery indicator
may illuminate when temperatures are outside the range
of 10-35C. This does not necessarily indicate low batteries and will switch off once the temperature
returns to this range (also see note above on the use of Alkaline batteries).
- 5 -
WS1093