Discount Car Stereo CORVETTE IL-C5 Manuale di installazione rapida - Pagina 2

Sfoglia online o scarica il pdf Manuale di installazione rapida per Automobile Accessories Discount Car Stereo CORVETTE IL-C5. Discount Car Stereo CORVETTE IL-C5 6. Ios adapter in 1997-04 corvette

Stampa la pagina

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

▪

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

We do not accept any responsibility for vehicle damage or personal injury resulting from

▪

the installation of this product.

▪

Careless installation and operation can result in equipment damage

Requirement

1997-04 Corvette with FACTORY RADIO

Introduction

Just because you drive an older car does not mean you have to settle for old

technology. With the iL-C5, corvette owners are able to play and charge any iOS

Lightning devices without sacrificing the radio. The iL-C5 connects to the factory

radio AUX port and replaces the trunk/hatch mounted 12-disc CD changer

(if present), but with the storage capacity of theses Lightning devices,

sacrificing the changer should be an easy decision. The IL-C5 installs behind the

radio cavity using the PXHGM4 harness (See installation 1 below) or to the 10-

pin CD plug in trunk/hatch using the PXHGM2 harness. CD changer in

trunk/hatch (if present) will need to be disconnected and will no longer

function.

Installation 1: (To radio)

Selecting the PXHGM4 harness requires radio removal.

Alternately, if vehicle has a 10-pin CD plug in trunk/hatch;

you may install module without removing radio, This installs

requires selecting the PXHGM2 harness—See installation

2 on page 3.

Click links below for radio removal videos:

Radio removal -

https://www.youtube.com/watch?v=Gcrlufo1ctc

https://www.youtube.com/watch?v=WTbWYNJTSDs

Locate 20-pin plug and press black release tab to disconnect from radio

(See Fig. 1)

2. Connect 20-pin plug (from step 1), to matting 20-pin socket (white) on

installation harness (See Fig. 2).

3. Connect installation harness 20-pin black/gray plug (See Fig. 2) to radio

20-pin socket vacated in step 1

4. Ensure plugs/connectors are snug

Fig. 1

Fig. 2

PXHGM4 harness