Discount Car Stereo BLU-C5 Istruzioni per l'installazione - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Ricevitore Discount Car Stereo BLU-C5. Discount Car Stereo BLU-C5 12. Music streaming module for seelect 1997-04 corvette
Anche per Discount Car Stereo BLU-C5: Manuale di installazione (9 pagine), Manuale di istruzioni per l'installazione (12 pagine), Manuale di installazione (10 pagine), Manuale di installazione (8 pagine), Manuale di installazione (12 pagine)

Introduction

The BLU-C5 module, adds music streaming capabilities to all C5 with original

Theftlock radios (Bose or non-Bose). User decide if to install module behind the

radio or (when available) to 10-pin plug in trunk/hatch. Optional 12-disc changer

must be disconnected or purchase our

installed, pair smartphone, tablet etc. to stream Apple music, navigation, Spotify,

XM radio, Pandora, audio books or other applications while on the way to work or

cruising around town.

Note: The BLU-C5 does not interfere with existing radio operation; however,

optional 12-disc changer (if present); must be disconnected.

Go to frequently asked question page at the end of this guide.

Installation 1: (

To radio with PXHGM4 harness

With the PXHGM4 harness, the module connects to car behind

radio cavity. With the PXHGM2 harness, the module connects to

car at 10-pin plug in trunk/hatch (proceed to page 4).

The 12-disc changer (if present) must be disconnected.

Purchase our

A2D-C5

Click links below for radio removal video)

Radio removal required. (

https://www.youtube.com/watch?v=Gcrlufo1ctc

https://www.youtube.com/watch?v=WTbWYNJTSDs

Locate factory 20-pin plug. Press black release tab to disconnect from

radio (See Fig. 1)

A2D-C5

to retain changer. Once

)

to retain CD changer playback.

Fig. 1

2. Connect factory 20-pin plug (from step 1), to matting connector (white)

on installation harness (See Fig. 2).

Fig. 2

PXHGM4 installation harness

3. Connect installation harness 20-pin black/gray plug (See Fig. 2) to

radio 20-pin connector vacated in step 1

4. Ensure module dip-switches #3 and #8 are "ON" or down (See Fig. 3)

Fig. 3

5. Connect installation harness 22-pin Molex plug (See Fig. 2) to module

22-pin Molex connector (See Fig. 4)

Fig. 4