Cub Cadet FT 24 R Front-Tine Garden Tiller Manuale dell'operatore - Pagina 14

Sfoglia online o scarica il pdf Manuale dell'operatore per Attrezzature per prato e giardino Cub Cadet FT 24 R Front-Tine Garden Tiller. Cub Cadet FT 24 R Front-Tine Garden Tiller 20. Cub cadet ft24 r front tine tiller
Anche per Cub Cadet FT 24 R Front-Tine Garden Tiller: Manuale (1 pagine), Opuscolo e specifiche (2 pagine)

Stampa la pagina

Cub Cadet FT 24 R Front-Tine Garden Tiller Manuale dell'operatore

Off-Season Storage

If the tiller will not be used for a period longer than 30 days, the

following steps should be taken to prepare the tiller for storage.

Clean the exterior of the engine and the entire tiller

thoroughly. Lubricate the tiller as described in the

lubrication instructions.

The use of pressure washers is not recommended for

cleaning your tiller. They may cause damage to electric

components, spindles, pulleys, bearings or the engine. The

use of pressure washers will result in shortened life and

reduce serviceability.

Engines stored between 30 and 90 days need to be treated

with a gasoline stabilizer such as STA-BIL® and engines

stored over 90 days need to be drained of fuel to prevent

deterioration and gum from forming in fuel system or on

essential carburetor parts. If the gasoline in your engine

deteriorates during storage, you may need to have the

carburetor, and other fuel system components, serviced or

replaced.

WARNING:

container outdoors, away from an open flame. Allow

engine to cool. Extinguish cigarettes, cigars, pipes,

and other sources of ignition prior to draining fuel.

Refer to the engine manual for more information on

storing the engine.

Wipe tines with oiled rag to prevent rust.

Store tiller in a clean, dry area. Do not store next to

corrosive materials, such as fertilizer.

NOTE: When storing any type of power equipment in

an unventilated area or metal storage shed, care should

be taken to rustproof the equipment. Using a light oil or

silicone, coat the equipment and especially any springs,

bearings, and cables.

6— M

ection

aintenance

Drain fuel only into anapproved

& a

djuStMentS