Cub Cadet FT 24 R Front-Tine Garden Tiller 운영자 매뉴얼 - 페이지 14

{카테고리_이름} Cub Cadet FT 24 R Front-Tine Garden Tiller에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet FT 24 R Front-Tine Garden Tiller 20 페이지. Cub cadet ft24 r front tine tiller
Cub Cadet FT 24 R Front-Tine Garden Tiller에 대해서도 마찬가지입니다: 매뉴얼 (1 페이지), 브로셔 및 사양 (2 페이지)

Cub Cadet FT 24 R Front-Tine Garden Tiller 운영자 매뉴얼
Off-Season Storage
If the tiller will not be used for a period longer than 30 days, the
following steps should be taken to prepare the tiller for storage.
1.
Clean the exterior of the engine and the entire tiller
thoroughly. Lubricate the tiller as described in the
lubrication instructions.
2.
The use of pressure washers is not recommended for
cleaning your tiller. They may cause damage to electric
components, spindles, pulleys, bearings or the engine. The
use of pressure washers will result in shortened life and
reduce serviceability.
3.
Engines stored between 30 and 90 days need to be treated
with a gasoline stabilizer such as STA-BIL® and engines
stored over 90 days need to be drained of fuel to prevent
deterioration and gum from forming in fuel system or on
essential carburetor parts. If the gasoline in your engine
deteriorates during storage, you may need to have the
carburetor, and other fuel system components, serviced or
replaced.
WARNING:
container outdoors, away from an open flame. Allow
engine to cool. Extinguish cigarettes, cigars, pipes,
and other sources of ignition prior to draining fuel.
4.
Refer to the engine manual for more information on
storing the engine.
5.
Wipe tines with oiled rag to prevent rust.
6.
Store tiller in a clean, dry area. Do not store next to
corrosive materials, such as fertilizer.
NOTE: When storing any type of power equipment in
an unventilated area or metal storage shed, care should
be taken to rustproof the equipment. Using a light oil or
silicone, coat the equipment and especially any springs,
bearings, and cables.
14
S
6— M
ection
aintenance
Drain fuel only into anapproved
& a
djuStMentS