3D AEROWORKS FUN JET X-88 Manuale di montaggio e manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale di montaggio e manuale d'uso per Giocattolo 3D AEROWORKS FUN JET X-88. 3D AEROWORKS FUN JET X-88 18.

Fit the battery using Velcro as required and balance the aircraft on the CG marking points

located 125mm aft of the leading edge at the wing root.

It is advisable on the first flight for the aircraft to be balanced on the cg markings, then

move forward or aft as desired.

The design of the wing incorporates "up-trim" into the trailing edge, Resulting in the neutral

position of the elevons to be in line with the trailing edge of the wing.

RANGE OF TRAVEL:

NORMAL / MAIDEN FLIGHT:

Elevator

+/- 15mm

Aileron

+/- 15mm

AEROBATIC:

Elevator

+/- 30mm

Aileron

+/- 30mm

LAUNCHING:

It was found that the safest and most successful launch technique for this model was the

over-arm style. The aircraft should be launched at approximately 10deg nose up at 50% to

75% power. Too steep and the aircraft will stall, too shallow and it will contact the ground.

BALANCING AND CG