3D AEROWORKS FUN JET X-88 Montaj Kılavuzu ve Kullanım Kılavuzu - Sayfa 15
Oyuncak 3D AEROWORKS FUN JET X-88 için çevrimiçi göz atın veya pdf Montaj Kılavuzu ve Kullanım Kılavuzu indirin. 3D AEROWORKS FUN JET X-88 18 sayfaları.
Sayfayı Yazdır
Fit the battery using Velcro as required and balance the aircraft on the CG marking points
located 125mm aft of the leading edge at the wing root.
It is advisable on the first flight for the aircraft to be balanced on the cg markings, then
move forward or aft as desired.
The design of the wing incorporates "up-trim" into the trailing edge, Resulting in the neutral
position of the elevons to be in line with the trailing edge of the wing.
RANGE OF TRAVEL:
NORMAL / MAIDEN FLIGHT:
Elevator
+/- 15mm
Aileron
+/- 15mm
AEROBATIC:
Elevator
+/- 30mm
Aileron
+/- 30mm
LAUNCHING:
It was found that the safest and most successful launch technique for this model was the
over-arm style. The aircraft should be launched at approximately 10deg nose up at 50% to
75% power. Too steep and the aircraft will stall, too shallow and it will contact the ground.
BALANCING AND CG