3D Creations North American P 51 D Mustang Manuale di istruzioni per il montaggio - Pagina 15
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Giocattolo 3D Creations North American P 51 D Mustang. 3D Creations North American P 51 D Mustang 15. Paper scale model kit
Stampa la pagina
Glue the spinner to parts # 47 and 48 with the blue glue tabs as shown in figure 42. The
propeller and spinner when correctly mounted will not be in the center. It should be offset
enough to leave the air intake exposed. If you build the kit to fly you must balance the
ship. Pick up the aircraft by the wing tips at the balance points shown in figure 44 the
ship should be level. Add or subtract parts # 48 until the balance is obtained. Sparingly
apply liquid glue to the edge of parts # 47 and 48.Insert the propeller assembly into the
nose section of the fuselage. When mounting the propeller to the fuselage the air intake
should be on the bottom. See figure 43.
15