3D Creations North American P 51 D Mustang 조립 지침 매뉴얼 - 페이지 15

{카테고리_이름} 3D Creations North American P 51 D Mustang에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Creations North American P 51 D Mustang 15 페이지. Paper scale model kit

페이지 인쇄

3D Creations North American P 51 D Mustang 조립 지침 매뉴얼

Glue the spinner to parts # 47 and 48 with the blue glue tabs as shown in figure 42. The

propeller and spinner when correctly mounted will not be in the center. It should be offset

enough to leave the air intake exposed. If you build the kit to fly you must balance the

ship. Pick up the aircraft by the wing tips at the balance points shown in figure 44 the

ship should be level. Add or subtract parts # 48 until the balance is obtained. Sparingly

apply liquid glue to the edge of parts # 47 and 48.Insert the propeller assembly into the

nose section of the fuselage. When mounting the propeller to the fuselage the air intake

should be on the bottom. See figure 43.