3D Hobby Shop 62 inch OSIRIS Manuale di montaggio - Pagina 11
Sfoglia online o scarica il pdf Manuale di montaggio per Giocattolo 3D Hobby Shop 62 inch OSIRIS. 3D Hobby Shop 62 inch OSIRIS 14.
Stampa la pagina11
Mount your brushless motor using 4 long 4mm screws and 4 appropriate standoffs. Note
that 3 different lengths of standoff are included in the kit, as well as two lengths of 4mm
screw. The standoffs are wood and can be sanded of trimmed as needed. Use blue loctite
on 4mm screws.
The cowl mounts using four screws through the four plywood tabs at the front of the
fuselage. To make the correct holes in the cowl and tabs, tape a paper strip over the tab as
shown, then install the cowl, the paper strip will indicate the correct position of the tab for
drilling.