3D Hobby Shop 62 inch OSIRIS Montagehandleiding - Pagina 11
Blader online of download pdf Montagehandleiding voor {categorie_naam} 3D Hobby Shop 62 inch OSIRIS. 3D Hobby Shop 62 inch OSIRIS 14 pagina's.
Pagina afdrukken11
Mount your brushless motor using 4 long 4mm screws and 4 appropriate standoffs. Note
that 3 different lengths of standoff are included in the kit, as well as two lengths of 4mm
screw. The standoffs are wood and can be sanded of trimmed as needed. Use blue loctite
on 4mm screws.
The cowl mounts using four screws through the four plywood tabs at the front of the
fuselage. To make the correct holes in the cowl and tabs, tape a paper strip over the tab as
shown, then install the cowl, the paper strip will indicate the correct position of the tab for
drilling.