CubuSynth VCFA Manuale di costruzione - Pagina 8
Sfoglia online o scarica il pdf Manuale di costruzione per Pedale musicale CubuSynth VCFA. CubuSynth VCFA 14. Multimode vcf with lp,hp and bp outputs and integrated vca
Anche per CubuSynth VCFA: Manuale (5 pagine)
Stampa la paginaCubuSynth VCFA - Build Guide
STEP 8 (Main PCB)
Trimmer
1
Place the 100k Trimmer according to the marking on the PCB, like
shown in the picture.
You can bend the legs outwards so it stays in place.
Turn around the board and solder.
STEP 9 (Main PCB)
M3 Standoffs & Screws
2
4
Place the screws in the holes of the PCB so they stand out on
the side with all components and screw them from the other
side like in the pictues.
Page 8
CV Trim
TRIM1_100K
M3 Spacer 11mm
M3 spacer 11mm height
M3 Screw
M3 screw, max length 6mm, Philips Head
PCB V1.2 Sept 2022