CubuSynth VCFA Oluşturma Kılavuzu - Sayfa 8
Müzik Pedalı CubuSynth VCFA için çevrimiçi göz atın veya pdf Oluşturma Kılavuzu indirin. CubuSynth VCFA 14 sayfaları. Multimode vcf with lp,hp and bp outputs and integrated vca
Ayrıca CubuSynth VCFA için: Manuel (5 sayfalar)
Sayfayı YazdırCubuSynth VCFA - Build Guide
STEP 8 (Main PCB)
Trimmer
1
Place the 100k Trimmer according to the marking on the PCB, like
shown in the picture.
You can bend the legs outwards so it stays in place.
Turn around the board and solder.
STEP 9 (Main PCB)
M3 Standoffs & Screws
2
4
Place the screws in the holes of the PCB so they stand out on
the side with all components and screw them from the other
side like in the pictues.
Page 8
CV Trim
TRIM1_100K
M3 Spacer 11mm
M3 spacer 11mm height
M3 Screw
M3 screw, max length 6mm, Philips Head
PCB V1.2 Sept 2022