Acoustic B200 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Acoustic B200. Acoustic B200 16. Bass guitar amps
Anche per Acoustic B200: Manuale d'uso (8 pagine)

Stampa la pagina
Acoustic B200 Manuale d'uso
B200, B200H, B410, B115, B600H, B810
pANEL coNfigURATioN

frONT pANEl lAyOuT

B200
1
2
3
1. 1/4" Active input – use for bass guitars with active pickups. This input is -10dB from the passive input.
2. 1/4" Passive input – use for bass guitars with passive pickups.
3. Gain control – set so clip indicator does not light, otherwise distortion may occur.
4. Volume level control – set to your desired volume level. If distortion occurs, reduce volume level.
5. Active -10 dB notch at frequencies from 50Hz to 1kHz – approximately 250Hz with the frequency knob
at 12 o'clock.
6. Active low frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies centered around 63 Hz.
7. Active low-mid frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies centered around 150 Hz.
8. Active low-mid frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies centered around 350 Hz.
9. Active high-mid frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies centered around 800 Hz.
10. Active high frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies centered around 2 kHz.
11. Active high frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies set centered around 5 kHz.
12. On/Off light - when this jewel light is lit, your amp is on and ready to be played.
13. Power switch - turns amp on or off.
200 WATT COMBO, 200 WATT HEAD, 410 CABINET,
115 CABINET, 600 WATT HEAD, 810 CABINET
13
4
5
6
7
USER'S MANUAL
8
9
10
11
12
13
7