Acoustic B200 사용자 설명서 - 페이지 7

{카테고리_이름} Acoustic B200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic B200 16 페이지. Bass guitar amps
Acoustic B200에 대해서도 마찬가지입니다: 소유자 매뉴얼 (8 페이지)

B200, B200H, B410, B115, B600H, B810

pANEL coNfigURATioN

B200

1. 1/4" Active input – use for bass guitars with active pickups. This input is -10dB from the passive input.

2. 1/4" Passive input – use for bass guitars with passive pickups.

3. Gain control – set so clip indicator does not light, otherwise distortion may occur.

4. Volume level control – set to your desired volume level. If distortion occurs, reduce volume level.

5. Active -10 dB notch at frequencies from 50Hz to 1kHz – approximately 250Hz with the frequency knob

at 12 o'clock.

6. Active low frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies centered around 63 Hz.

7. Active low-mid frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies centered around 150 Hz.

8. Active low-mid frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies centered around 350 Hz.

9. Active high-mid frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies centered around 800 Hz.

10. Active high frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies centered around 2 kHz.

11. Active high frequency control – set to boost (+12 dB) or cut (-12 dB) frequencies set centered around 5 kHz.

12. On/Off light - when this jewel light is lit, your amp is on and ready to be played.

13. Power switch - turns amp on or off.

200 WATT COMBO, 200 WATT HEAD, 410 CABINET,

115 CABINET, 600 WATT HEAD, 810 CABINET

USER'S MANUAL