Aerial Assault Wakeboard Tower Manuale di installazione - Pagina 11

Sfoglia online o scarica il pdf Manuale di installazione per Attrezzatura per la nautica Aerial Assault Wakeboard Tower. Aerial Assault Wakeboard Tower 13.

Stampa la pagina

STEP 14

STEP 15

STEP 16

Drilling the top section.

The X measurement is a great way to make sure that your

tow point is in the center of your boat. To do this, measure

from the tow point to your rear foot, then to your other

foot. Cover your boat with an old sheet or old cover to

make removing the metal shavings easy. Someone should

hold the top section while you drill.

Using the pre-drilled holes in the top section tube, mark the

drilling positions on the front leg tubes.

Before making your marks, check to ensure that the tow

point is aligned correctly and positioned vertically. The tow

point should also be positioned on the rear of the top sec-

tion tube so that the logo plate is facing towards the bow

of the boat.

We then recomend drilling the holes with a smaller drill bit

(smaller than the 27/64" drill bit) to make a pilot hole.

Following the pilot holes you just drilled, use a 27/64" drill bit

to create the clearance hole for the joining bolts.

As each hole is drilled we recommend inserting each bolt

so that it keeps the parts aligned while drilling the next

hole.

GUIDE#: pwb-ASSAULT-004