3d-printz Nice 2000 Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Giocattolo 3d-printz Nice 2000. 3d-printz Nice 2000 6.

Stabilizer

First glue the rudder to the skid, making sure that no glue gets onto the movable

rudder surface. Then put the rudder on the protruding part of the 8mm carbon

fuselage tube and check for fit. Now the fin can be glued extensively with Fus5.

Glue the parts El_right, El_middle and El_left together, not forgetting the

controllsurface. The Elevator is secured with an M5 plastic screw which threads into

the M5 nut located in the pylon.

Wings

The wings are joined by a 1000mm long 8mm carbon tube in the front and a

185mm long 8mm carbon tube a little further back. When assembling the

wings, make sure they are glued flush. The carbon tube serves as a guide.