3DHobbyShop.com Yak 54 Manuale di montaggio - Pagina 6

Sfoglia online o scarica il pdf Manuale di montaggio per Giocattolo 3DHobbyShop.com Yak 54. 3DHobbyShop.com Yak 54 18. 55” arf rc aircraft

Locate the carbon wing-spar tube. Slide it into the fuselage tube.

NOTE: Due to the high-performance nature of this airplane, the carbon wing tube must be a snug-fit into

the wing and fuselage. It may be necessary to lubricate your wing tube from time to time. We

recommend the use of non-stick cooking spray as a lubricant.

Locate the horizontal stabilizer. Slide the stabilizer into the fuselage.

Align the stabilizer with the fuselage in all directions. Check the alignment with a ruler, and check to

make sure the stabilizer is level with the wing tube. It may be helpful to temporarily slide the elevators

into their slots (DO NOT GLUE THE ELEVATORS IN YET!) to help check alignment. This alignment will

take some time.

When you are satisfied with your stabilizer position, use thin CA glue to glue the stabilizer into the slot.

The fit between the stabilizer and the fuselage is meant to be a tight fit. If you need to sand or trim the

slot to achieve proper stabilizer alignment, do so, and if the fit is now loose, use Epoxy glue instead of CA

on this joint. Epoxy will fill any gaps better than CA.