3DLab GANG PRINT BEAT PZL p.11c Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Giocattolo 3DLab GANG PRINT BEAT PZL p.11c. 3DLab GANG PRINT BEAT PZL p.11c 19. Polish fighter

member of Group

WING ASSEMBLY - AILERON

Aileron: Glue together the parts with the installed servo (14-15-16) into which you put the inner part of the

aileron (23) ﬁtted with a 0.9mm-1.2mm axle made from a bowden wire or paper clips, then install the outer part

of the aileron (24) with the axle from each side and connect both parts of the ailerons so that the axle ﬁts into

the wing openings.

Warning: Apply the glue carefully so that the aileron remains movable.