3DLab GANG PRINT BEAT PZL p.11c Посібник користувача - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник користувача для Іграшка 3DLab GANG PRINT BEAT PZL p.11c. 3DLab GANG PRINT BEAT PZL p.11c 19 сторінок. Polish fighter
Друкувати сторінку
member of Group
WING ASSEMBLY - AILERON
Aileron: Glue together the parts with the installed servo (14-15-16) into which you put the inner part of the
aileron (23) fitted with a 0.9mm-1.2mm axle made from a bowden wire or paper clips, then install the outer part
of the aileron (24) with the axle from each side and connect both parts of the ailerons so that the axle fits into
the wing openings.
Warning: Apply the glue carefully so that the aileron remains movable.
15